This indicates that the parking brake is not fully engaged or not fully released.
Stop the vehicle if this light illuminates. Make sure the parking brake is not engaged. Check brake fluid levels or bring it in so a technician can look at your vehicle.
This indicates a malfunction in the vehicle’s charging system.
This indicates a malfunction in either the SRS airbag system, the seat belt pre-tensioner system, or the front passenger occupant classification system.
This means that a door or the trunk is not fully closed.
Helps deter theft by preventing the hybrid system from starting until the registered key is in the vehicle.
Warns the driver or passengers to fasten their seat belts.
Indicates that the engine oil pressure is low.
Indicates that the engine is overheating.
Indicates that there’s a malfunction in the power steering system.
Indicates low tire inflation pressure from natural causes or a flat tire.
Indicates a malfunction in the electronic engine control system, the electronic throttle control system, or the electronic automatic transmission control system.
Indicates that the remaining fuel is less than four gallons.
Warns drivers that their automatic headlight leveling system is not working properly.
This means that there is either a malfunction in the anti-lock braking system or the brake assist system.
Indicates that the blind spot monitoring system is enabled, alerting the driver that a vehicle is in the blind spot of the rearview mirrors.
Indicates that the traction control system has been manually turned off.
This means that the VSC, TRAC, or trailer sway control system is operating if the indicator is illuminated.
The vehicle stability control system is not operational if the indicator is illuminated.
This means that the high beams are currently in use.
This shows that the automatic high beams have been turned on.
Alerts the driver that the Eco driving mode has been initiated, which helps the driver accelerate in a fuel-efficient manner.
Indicates that the cruise control function is ready to use.
This illuminates when your cruise control has been activated and has been set to a selected speed.
This signals that the dynamic radar cruise has been initiated. This can be used in vehicle-to-vehicle distance control mode or constant speed control mode.
You don't have any saved vehicles!
Look for this link on your favorites:
Once you've saved some vehicles, you can view them here at any time.